How to Change a Flat Tire Safely
Decide whether the location is safe, then use your vehicle’s instructions to install its spare.
If you are close to moving traffic, on a slope, or missing the proper equipment, call for assistance.

- Before lifting
- Firm, level ground away from traffic
- While lifting
- Use the model’s designated jack point
- Before driving
- Check fastener torque, tire pressure, and spare limits
Step by step
Secure the vehicle before touching the wheel
Pull fully away from traffic, turn on the hazard lights, and switch off the engine. Apply the parking brake and put the transmission in the position specified by your manual. Get passengers clear of the vehicle and traffic. Use wheel chocks as the manual directs.
Get the spare, tools, and manual
Find your designated jack point and check that the spare and equipment are usable. If the vehicle came with a repair kit instead of a spare, use its own procedure or call roadside assistance. Stop if the safe lifting point is unclear or the tools are damaged.
Prepare and lift only as instructed
The Hyundai procedure loosens the lug nuts slightly with the wheel still on the ground, then lifts at the marked point with the designated jack. Follow your own manual for the sequence. Keep every part of your body out from under the raised vehicle.
Install the spare and check the limits
Seat the spare and hand-start the fasteners before tightening them in the order and to the torque specified by your manual. Check the spare’s pressure and any speed or distance restrictions before driving. Arrange repair or replacement promptly, especially with a temporary spare.
Official instructions and references · Hyundai owner’s manual, flat tire procedure