How to Clean a Washing Machine
Run the washer’s cleaning cycle, then wipe the parts that stay damp between loads.
Use the cycle and cleaner specified in your model’s manual.

- Inside the drum
- Run the model’s cleaning cycle empty
- Door and dispenser
- Wipe accessible surfaces while the machine is stopped
- Afterward
- Dry the gasket and check for standing water
Step by step
Check the manual first
Find the model number and look for the maintenance section. Note whether your washer calls for a cleaning tablet, liquid bleach, or another cleaner. Choose one approved product and follow its dosing instructions.
Run the designated cycle
Remove all laundry and start Clean Washer, Tub Clean, or the equivalent on your machine. Where the cleaner goes varies by model. Keep ordinary laundry detergent out of this cycle unless your manual directs otherwise.
Wipe the areas the cycle can miss
With the machine stopped and cool, use a soft damp cloth on the door and the accessible surfaces of the dispenser. On a front loader, gently open the rubber gasket folds and lift out lint or debris. Remove the drawer only if your manual shows how.
Let the washer dry
Wipe moisture from the gasket and leave the door ajar if it can be done safely in your household. Check the manual for the recommended cleaning interval.
If the smell comes back
Check whether water is pooling in the drum or gasket after an ordinary cycle. A recurring pool, a leak, or a drain error calls for model-specific troubleshooting before another cleaning cycle.
Official instructions and references · Whirlpool