EverydayFix.
Home

How to Fix a Running Toilet

Use the tank water level to narrow down whether to check the float or the flush seal.

Check the overflow tube

Water spilling into the tube points you toward the float or fill valve.

Open toilet tank with the float assembly, overflow tube, and red rubber flapper visible
Generated editorial illustration. Tank layouts vary by model.
Water goes into overflow tube
Check float and fill valve
Water stays below tube
Check flush seal and chain

Step by step

  1. Look inside the tank

    Lift the lid with both hands and rest it flat on a towel. Flush once and watch where the water goes as the tank refills.

  2. Check the refill level

    If water flows into the overflow tube, check that the float moves freely. Use the adjustment described for your model to bring the refill level down to the tank’s marked line.

  3. Check the flush seal

    If the level stays below the overflow tube and the tank refills by itself, check for a snagged chain or a worn flapper or canister seal. Shut off the supply and flush before removing parts. Match a replacement to your toilet model.

  4. Run a full flush

    Reopen the supply and let the tank fill, then flush and watch for a quiet shutoff. If the shutoff is stuck, water is leaking outside the tank, or the toilet keeps running after these checks, contact a plumber.

Official instructions and references · Kohler